Water Quality Test

🏠 Dashboard BS 7593
📋 Linked to — results will save to the certificate
Select your test kit
Choose the brand of water test kit you're using
🟢
Sentinel
InstaCheck Kit
🔵
Fernox
Instant System Test
🟡
ADEY
ProCheck Kit
⚪
Other
Generic strips
Customer / Property
Turbidity test
Fill the turbidity tube with system water and assess clarity
ℹ️ Allow the system to cool enough to safely draw off a water sample. Run water for a few seconds and discard before taking the sample. Assess in daylight, not direct sunlight.
Clear
Can see through tube
Slightly cloudy
Mild discolouration
Cloudy
Noticeably murky
Very cloudy
Cannot see through
Photo evidence (optional)
Water quality test
Test for pH level and dissolved copper (corrosion)
ℹ️ Dip the water quality test strip into the sample for 1 second and remove. Compare to the colour chart within 10 seconds.
pH Level
Acceptable range: pH 7.0 – 8.5
Copper / Corrosion (ppm)
Acceptable: 0 – 2 ppm · Above 2 ppm = active corrosion
Photo evidence (optional)
Inhibitor test
Test the inhibitor concentration level
ℹ️ Dip the inhibitor test strip into the sample for 1 second and remove. Shake once briskly. Compare to the colour chart on the bottle within 10 seconds.
Inhibitor Level (ppm)
Optimal: 100 – 250 ppm · Below 100 ppm = re-dose needed
Photo evidence (optional)
Engineer notes (optional)
Test results
Results summary
Turbidity
pH Level
Copper / Corrosion
Inhibitor Level
Recommendations
Test information
Property
Test kit
Standard
BS 7593:2019
📱 Pinch to zoom — saved PDF will look correct